- 2024-01-22 16:24:11
Sewn Geocomposite, a Good Product in Proje...
- 2022-06-14 14:39:59
Introduction of our new products
- 2021-09-22 14:22:29
Perfect Quality Testing and After Sales Se...
- 2020-08-29 08:54:27
The company trade realizes the recovery gr...
Address : Jiwei Road, Taian City, Shandong Province, China
Tel : 86-0538-6711962
Fax : 86-0538-8568234
Email : sales@staremt.com
info@staremt.com
henry@staremt.com
Mobile : 86-18253806479
Product
back>>E-Glass Chopped Strand Mats
![](/upfile/201704/2017042075143769.jpg)
Description
E-Glass Chopped Strand Mats are an unwoven fabric consisting of randomly distributed chopped strands held together with a powder or emulsion binder.
Compatible Sizings and Applications
E-glass chopped strand mat are compatible with unsaturated polyester,vinyl ester,epoxy resins.
The typical end-use applications include various panels, boats, bathroom equipment, automotive parts and cooling towers. E-Glass Light Weight Chopped Strand Mats
are most widely used in automobile inner headliners with any width less than 3.2 meters.
Product Features
1、Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
2、Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter.
3、Excellent flexibility ensures good mold ability with no spring back at sharp angles.
4、Fast and consistent wet-out speed in resins and rapid air lease reduce resin consumption and production cost and enhance productivity and mechanical properties of the end products.
5、The composite products have high dry and wet tensile strength and good transparency.
Note:E-glass Chopped Strand Mats are available with a width range of 200mm~3200mm.Other specifications are also available on customer request.
Packaging
Each Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 79mm.The mat roll is wrapped with plastic film,and then packed in a cardboard box.The roll can be vertically or horizontally placed.For transportation,the rolls can be loaded into a container directly or on pallets.
Storage
Unless otherwise specified,fiberglass products should be stored in a dry,cool and rain-proof area.It is recommended that the room temperature and humidity should be always at 15℃-35℃ and 35%-65% respectively.
Technical Parameters of E-Glass Chopped Strand Mats
Property | Area Weight(%) | Moisture Content(%) | Combustible Content(%) | Breakage | Width(mm) |
Test Method | ISO 3374 | ISO3344 | ISO1887 | ISO3342 | ISO5025 |
EMC225 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥60 | ±5 |
EMC300 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥90 | ±5 |
EMC375 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥100 | ±5 |
EMC450 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥120 | ±5 |
EMC600 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥150 | ±5 |
EMC900 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥180 | ±5 |
Technical Parameters of E-Glass Light Weight Chopped Strand Mats
Property | Area Weight(%) | Moisture Content(%) | Combustible Content(%) | Breakage | Width(mm) | |
Test Method | ISO 3374 | ISO3344 | ISO1887 | ISO3342 | ISO5025 | |
EMC100 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥30 | ±5 | |
EMC120 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥30 | ±5 | |
EMC150 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥30 | ±5 | |
EMC200 | -10.0/+10.0 | ≤0.20 | 2-9 | ≥30 | ±5 |